Customer Service 1-888-707-1880
Dyaco Canada Inc. 2021
Email: [email protected]
15
STEP 4
1. Secure the Seat (No.61) to the Seat Carriage (No.4) using 4 Screws (No.98) using the
Philips Screwdriver (No.114).
2. Connect the Wires on the back of the console to their respective places: Computer Cable
(No.44), Handpulse Wire (No.45), CSAFE Connecting Wire (No.204), Network Connecting
Cable (No.192), HDMI Connecting Wire (No.186). Tuck excess cable into the Console Mast
(No.2), being careful not to pinch the wires.
3. Secure the Console (No.19) to the Console Mast (No.2) using 4 Screws (No.99) using the
Screwdriver (No.114).
4. Fasten the Drink Bottle Holders (No.39/38) to the Rear Handlebar (No.6) using 4 Screws
(No.105).
5. Install the Pedals (No.116R/116L) onto the Crank Arms (No. 51L/51R) carefully using the
Wrench (No.132) to hold the Pedal pivot, then firmly fasten the pivot clockwise.
