CUSTOMER SERVICE 1-888-707-1880 1611683900(CB900)©2013
7
3
Handlebar, Saddle and
Pedals Assembly
Place the Handle Bar (6) on the top end of the Handlebar Post and secure with M8 × 15L Button
Head Socket Bolts (53), Ø8 × 1.5T (5/16'' × 1.5T) Split Washers (76) and 5/16" × 16 × 1.5T Flat
Washers (73) by using Combination M5 Allen Wrench & Phillips Head Screw Driver (87). Use the
same screw driver (87) to secure the Drink Bottle Holder with M5 × 10m/m Phillips Head Screws
(57). Finally,
use 14.15m/m Wrench (86) to secure the Saddle (26). Apply Ø14 × 20 × 2.0T Flat
Washers (89) on Pedals (25L
、
25R) and again use 14.15m/m Wrench (86) to secure.
Note: the left pedal uses a left hand thread, so you will tighten by threading it in counterclockwise.
HARDWARE
#53.
M8 × 15mm
Button Head Socket
Bolt (4pcs)
#76.
5/16'' × 1.5T
Split Washer
(4pcs)
#73.
5/16" × 16 × 1.5T
Flat Washer
(4pcs)
#57.
M5 × 10m/m
Phillips Head Screw
(2pcs)
#89.
Ø14 × 20 × 2.0T
Flat Washer
(2pcs)