Spirit Healthcare TEE2+, Owner'S Booklet

Page: 28 / 68

28 www.i-sens.com
Step 3
Shake the bottle before
each test.
Remove the cap and
squeeze the bottle to
discard the first drop. Then
wipe the tip with a clean
tissue or cloth. Dispense a
drop of control solution onto a clean non-absorbent surface. It
helps to squeeze a drop onto the top of the cap as shown. After
the symbol appears on the display, apply the solution
to the narrow edge of the test strip until the meter beeps. Make
sure the confirmation window fills completely.
Note:
The meter may switch off if the control solution sample
is not applied within 2 minutes of the symbol
appearing on the screen. If the meter turns off, remove the
strip, reinsert, and start from step 1.