background image

Page 5 of 8 

USER INSTRUCTIONS 

 

 

The fireplace must only be used with approved bio-ethanol or gel fuel. 
Different types and brands of fuel may have different effects on the 
burner and some may produce smells when lit. The correct fuel must be 
ethanol based which is generally smoke free.  

 

 

The fuel must be poured into the trough provided using a funnel. The fuel 
must be filled to within 1 cm of the top of the burner. DO NOT OVERFILL.  
Ensure any spillages are wiped clean with a damp cloth and removed 
before lighting. 

 

 

To light: 

o

 

Simply touch the surface of the fuel with a naked flame.  We advise 
using a long lighter but matches can also be used. Ensure any used 
matches are disposed of and not left in the gel as this will cause 
smoke.  After about a few minutes the flame will be at its full height 
and will burn consistently. 

 

 

To extinguish:

 

o

 

We advise running the fire till it self extinguishes however if the fire 
is to be shut off earlier; 

o

 

Gently replace the special handle provided with the fire avoiding the 
flames etc. 

o

 

Using the handle gently slide the lid over the opening to shut off the 
oxygen to the burner. This will extinguish the flame. 

o

 

It may require a number of attempts to shut off the flame.  

 

 

Allow some time for the fuel reservoir to cool before re-filling. Do not re-
fill the tray when lit.   

 

 

The fuel reservoir should never be moved when lit or hot 

 
 

 

Adequate precautions need to be made to ensure that the flames & heat 
generated cannot cause damage to the surrounding location. 

 

 

Adequate ventilation should be available within the room to disperse any 
fumes and heat generated by the fire. 

 

 

In locations where Children or Elderly people are present it is advisable to 
fit a dress guard or fire guard as this is an open fronted and open flamed 
appliance. 

 

 

Fuel can be purchased from the website www.easyfire.co.uk 

 

 

The fire must be used in a room with adequate ventilation. It may be 
required to open a window when using the appliance. 

 

Summary of Contents for Lucent Gel Fire









Reviews: