IM-P357-29
CTLS Issue 14
35
5.7 PN9400EH (handwheel) :
-
Remove the dust cap from the top of the handwheel assembly.
-
Screw the adaptor (
C
) with the spindle of the actuator (
D
).
-
Fit the handwheel spacer (
B
) over the spindle.
-
Ensure the indicator is at the lowest point.
-
Fit the handwheel assembly (
A
).
-
Fit and tighten the securing bolts (
E
) to a torque of 50 Nm.
-
Insert and tighten the securing bolt (
F
).
-
Fit the dust cap.
5.7.1 Removal of handwheel
PN9400EH
-
Ensure indicator is at the lowest
position.
-
Remove dust cap.
-
Loosen and remove securing
bolt (
F
).
-
Loose and remove 4 securing
bolts (
E
).
-
Remove handwheel assembly
Fig. 19
A
F
B
D
E
C
Indicator
Summary of Contents for PN9120
