IM-P173-01-EN-ISS1
CMGT
5
1.13 Residual hazards
In normal use the external surface of the product may be very hot. If used at the
maximum permitted operating conditions the surface temperature of these products
may reach temperatures of 200 °C (392 °F).
These products are not self-draining. Take due care when dismantling or removing
the product from an installation (refer to 'Maintenance instructions').
1.14 Freezing
Provision must be made to protect products which are not self-draining against
frost damage in environments where they may be exposed to temperatures below
freezing point.
1.15 Disposal
Unless otherwise stated in the Installation and Maintenance Instructions, this
product is recyclable and no ecological hazard is anticipated with its disposal
providing due care is taken, with the exception of PTFE.
PTFE:
-
Can only be disposed of by approved methods, not incineration.
-
Keep PTFE waste in a separate container, do not mix it with other rubbish, and
consign it to a landfill site.
1.16 Returning products
Customers and stockists are reminded that under EC Health, Safety and Environment
Law, when returning products to Spirax Sarco they must provide information on
any hazards and the precautions to be taken due to contamination residues or
mechanical damage which may present a health, safety or environmental risk. This
information must be provided in writing including Health and Safety data sheets
relating to any substances identified as hazardous or potentially hazardous.
Summary of Contents for M70i ISO
Page 19: ...IM P173 01 EN ISS1 CMGT 19...
Page 20: ...IM P173 01 EN ISS1 CMGT 20...
