Spirax Sarco M70i ISO, Installation And Maintenance Instructions Manual

Page: 2 / 20

IM-P173-01-EN-ISS1 CMGT 2
1. Safety information
Safe operation of these products can only be guaranteed if they are properly
installed, commissioned, used and maintained by qualified personnel (see
Section 1.11) in compliance with the operating instructions. General installation
and safety instructions for pipeline and plant construction, as well as the proper
use of tools and safety equipment must also be complied with.
1.1 Intended use
Referring to the Installation and Maintenance Instructions, name-plate and Technical
Information Sheet, check that the product is suitable for the intended use/application.
The products listed below comply with the requirements of the European Pressure
Equipment Directive (PED) and carry the
mark when so required.
The products fall within the following Pressure Equipment Directive categories:
Product
Group 1
Gases
Group 2
Gases
Group 1
Liquids
Group 2
Liquids
M70i ISO and M80i ISO
½" SEP SEP SEP SEP
¾" SEP SEP SEP SEP
1" SEP SEP SEP SEP
1½" 2 1 2 SEP
2" 2 1 2 SEP
2½" 2 1 2 SEP
3" 2 1 2 SEP
4" 2 1 2 SEP