IM-P402-129
EMM Issue 7
7
2. User Instructions and delivery
information
Certain computer programs contained in this product were developed by
Spirax-Sarco Limited ("the Work(s)").
Copyright © Spirax-Sarco Limited 2017
All rights reserved
Spirax-Sarco Limited grants the legal user of this product (or device) the right to
use the Work(s) solely within the scope of the legitimate operation of the product
(or device). No other right is granted under this licence. In particular and without
prejudice to the generality of the foregoing, the Work(s) may not be used, sold,
licensed, transferred, copied or reproduced in whole or in part or in any manner
or form other than as expressly granted here without the prior written consent of
Spirax-Sarco Limited.
2.1 General description
The LC1350 is an on / off level controller for
conductive liquids. It has two alarm channels
that can be independently configured high
or low.
WARNING: The minimum conductivity
when used with the LP10 - 4 level probe
is 1 µS / cm at 25 °C.
Test the alarm
Clears errors
(Press and hold
for 5 seconds)
Fig. 1
Front panel keypad and definitions
Scroll up the menu
OK
AL
LC1350
2.2 Front panel
The front panel has a 3-digit LCD and a keypad.
2.3 Using the buttons
Press the button:
-
To scroll through the menus.
-
Press the
OK
button to enter commissioning mode (press and hold for five seconds).
-
The
AL
button can be used to test the alarm relay and the external circuits.
LCD display
Summary of Contents for LC1350
Page 35: ...IM P402 129 EMM Issue 7 35...
Page 36: ...IM P402 129 EMM Issue 7 36...
