IM-P358-26
CH Issue 1
13
3.4 Fitting the positioner card
(Figure 10)
To fit the positioner card insert the contact pins (
16
) into the terminal strip, on the actuator
PCB (
17
) by engaging the board into the retaining pegs on the actuator printed circuit board
and tighten the terminal screws.
Fig. 10
To fit the lid ensure that it is orientated correctly. Push the cover over the handwheel shaft on
the AEL55_. For the AEL56_, the operating rod for the handwheel must align with the button
inside the actuator.
Align the 3 fixing screws over the tapped holes in the gearbox housing. Tighten the fixing
screws with a suitable screwdriver.
AEL56_ actuator.
After the lid is fitted ensure the handwheel button can be pushed down to
engage the handwheel.
16
16
16
17
17
17
Summary of Contents for AEL5 Series
Page 27: ...IM P358 26 CH Issue 1 27...
Page 28: ...IM P358 26 CH Issue 1 28...
