SPINNING® STUDIO COMPUTER
OWNER’S MANUAL
www.spinning.com 800.847.SPIN (7746)
11
5. Peel back the adhesive cover to expose the tape. Align it with the
magnet on the inside of the crank arm, as shown in Fig. 5.
6. Once the cadence sensor and the magnet are aligned, affix the
tape on the sensor to the underside of the shroud (Fig. 6) and test
synchronization.
NOTE: To test synchronization, first press the reset button on the sensor.
Rotate the bike pedals for at least ten rotations. A green light will flash after
each pass to confirm the synchronization between the sensor and magnet.
Sensor Installation, Inside the Chain Guard:
NOTE: This process is for Spinner® bike models with a rounded chain
guard and non-flat underside.
1. Lock the flywheel and pedals by turning the resistance knob
clockwise.
Fig. 6
F
ig.
5
Summary of Contents for STUDIO COMPUTER
Page 1: ...OWNER S MANUAL SPINNING STUDIO COMPUTER...
Page 2: ......
