PAIRING THE CRANK
Your crank is designed to pair with a wide variety of
devices that receive signals in either ANT+ or Blue-
tooth formats. The crank is equipped with a motion
sensor that will turn it on while the crank is rotating
making an on/off switch unnecessary. Once the crank
is rotated it will take a few seconds for the signal to
activate your display device.
If you are pairing this for the first time to the Studio
SPINPower® computer, we suggest you pair the crank
before installing it on your Spinner® bike. The instruc-
tions for this pairing are included in the SPINPower®
Computer box.
Each crank has a unique 5-digit identification code.
That code can be used as a unique identifier when
pairing to an app or display device. Some display
devices will show that number when initial pairing
occurs. For reference, the 5-digit number is located
on top portion of the pod on the back as shown.
8
Summary of Contents for SPINPower Studio Crank
Page 1: ...PERFORMANCECRANK OWNER S MANUAL...
Page 2: ......
