SPINNING® STUDIO COMPUTER
OWNER’S MANUAL
www.spinning.com 800.847.SPIN (7746)
9
CADENCE SENSOR INSTALLATION
The Spinning® Studio Computer will track your cadence (measured in
RPM), time, distance and estimated calories burned. In order to track this
information, you must first attach the cadence sensor to the Spinner® bike.
We give you two options for mounting the sensor: inside the chain guard
or outside the chain guard. The components needed for the mounting
process will vary depending on your preferred method of installation and
your model of Spinner bike.
Mounting the Magnet:
NOTE: For the Spinner NXT Black Belt and Spinner Blade Belt, please use
the 7B (thinner) magnet. For all other Spinner bike models, please use the
7A (thicker) magnet.
1. Examine the inside of the right
crank arm and ensure that it
is clear of obstructions. Wipe
the inside of the crank arm to
remove any dust, grease and
grime.
2. For all Spinner bikes built by
Precor®, place the magnet on
the inside the dedicated slot
near the pedal spindle (Fig 2
and 3). Slowly rotate the crank
arm to ensure that the magnet
does not collide with the chain
guard.
F
ig
. 2
pedal spindle
F
ig
. 3
magnet
magnet slot
Summary of Contents for 800.847.SPIN
Page 1: ...OWNER S MANUAL SPINNING STUDIO COMPUTER...
Page 2: ......
