©2016 Mad Dogg Athletics, Inc. All rights reserved. Spin®, Spinner®, Spinning®, Spin Fitness®, SPINPower® and
the Spinning logo
® are registered trademarks that are owned by Mad Dogg Athletics, Inc.
16
1. After successfully pairing with
the cadence sensor and heart
rate transmitter, place the
rubber gasket inlay behind the
console (Fig 12).
2. Select the ring or flat bracket
(depending on Spinner bike
model you are using) and
secure it to the back of the
console with the three or
four Phillips head screws
and spacers (the flat mount
bracket with spacers is shown
in Fig. 13).
Fig. 12
To mount this Spinning® Computer to your commercial Spinner® bike,
please follow the steps below.
NOTE: Please ensure that the console
is pairing properly with your cadence
sensor and heart rate transmitter
before mounting it to your bike.
Fig. 13
Threaded
bracket
Contoured
bracket
Spacers
Screws
Summary of Contents for 800.847.SPIN
Page 1: ...OWNER S MANUAL SPINNING STUDIO COMPUTER...
Page 2: ......
