Data subject to change without notice│M36082│Issue B│2020-02-21
www.spinner-group.com
4 / 10
1.
General Safety Information
The following instructions and safety instructions are to be carefully read and followed!
The Spinner group makes every effort to keep the safety standard of our products up to date to be able to
offer our customers the highest possible degree of safety. Our products are designed and tested in
accordance with the relevant safety standards. Compliance with these standards is continuously monitored
by our quality assurance system. The product described here has been designed and tested in accordance
with the respective EU guidelines and has left the manufacturer’s plant in a condition fully complying with
safety standards. To maintain this condition and to ensure safe operation, observe all instructions and
warnings provided. If you have any questions regarding these safety instructions, the Spinner group will be
happy to answer them.
The operator is responsible for using the product in an appropriate manner. This product must not be used in
any way that may cause personal injury or property damage. The operator is responsible if the product is
used for an intention other than its designated purpose or in disregard of the manufacturer's instructions. The
manufacturer shall assume no responsibility for such use of the product.
The product is used for its designated purpose if it is used according to the specifications listed in the
product’s documentation within its performance limits (see data sheet, performance specifications, circuit
diagram and the following safety instructions).
Putting the product into operation requires special technical skills and must be executed by qualified
personnel with reference to “Start up information” in the product documentation. Keep the basic safety
instructions and the product documentation in a safe place and pass them on to the subsequent users.
Symbols and safety markings
Observe basic
safety instructions
-
Observe product
documentation
Danger of
electric shock
Warning! Non
ionised
electro magnetic
radiation
Ground
Observing the safety instructions will help prevent personal injury or damage of any kind caused by
dangerous situations. Therefore, carefully read through and adhere to the following safety instructions before
putting the product into operation. It is also absolutely essential to observe the additional safety instructions
on personal safety that appear in relevant parts of the product documentation.
Tags and their meaning
DANGER
Indicates a hazardous situation conveying great risk which, if not avoided, will result in death
or serious injury.
WARNING
Indicates a hazardous situation conveying moderate risk which, if not avoided, could result in
death or serious injury.
CAUTION
Indicates a hazardous situation conveying minor risk which, if not avoided, may result in minor
or moderate injury.
ATTENTION
Indicates the possibility of faulty operation that can damage the product.
These tags are in accordance with the standard definition for civil applications in the European Economic
Area. Definitions that deviate from the standard definition may also exist in other economic areas or military
applications. It is therefore essential to make sure that the tags described here are always used only in
connection with the related product documentation and the related product. The use of tags in connection
with unrelated products or documentation can result in misinterpretation and thus contribute to personal
injury or material damage.
