background image

 

USER INSTRUCTIONS 

 

 

 

 

 

 

 

 

 

 

 
LEAKS 
If a smell of gas becomes apparent, the supply should be turned off at the cylinder 
IMMEDIATELY. 

  Extinguish naked lights including cigarettes and pipes.  

  Do not operate electrical switches.  

  Open all doors and windows to disperse any gas escape. 

  Propane gas is heavier than air, any gas escaping will therefore collect at low level. 

The strong unpleasant smell of gas will enable the general area of the leak to be 
detected. Check that the gas is not escaping from an unlit appliance. 

  Never check for leaks with a naked flame, leak investigation should be carried out 

using a leak detector spray. 

 
MAINTENANCE 
This appliance needs little maintenance other than cleaning. All parts should be cleaned 
using warm soapy water. Do not use abrasive cleaners, steel wool or cleansing powders. 
When cleaning the burner ring it is essential to ensure that the holes do not become 
blocked. The control knobs are a push fit and can be removed for cleaning. They are 
interchangeable without affecting the sense of operation 
 
On units fitted with battery spark ignition, when the time taken for spark generation 
becomes extended, the battery should be renewed with a suitable make of long life 
battery. 
 
THIS APPLIANCE MUST NOT BE MODIFIED OR ADJUSTED UNLESS AUTHORISED 
AND CARRIED OUT BY THE MANUFACTURER OR HIS REPRESENTATIVE. 
NO PARTS OTHER THAN THOSE SUPPLIED BY THE MANUFACTURER SHOULD BE 
USED ON THIS APPLIANCE. 
 
 
WHO TO CONTACT 
For service, please contact your authorised local Service Agent giving full details of the 
model, serial number and date of purchase. 
 
 
 
 
 
WARNINGS 

  DO NOT store or use gasoline or other flammable vapours, liquids or items in 

the vicinity of this or any other appliance. 

  DO NOT spray aerosols in the vicinity of this appliance while it is in operation. 

  Where this appliance is installed in marine craft or in caravans, it shall not be 

used as a space heater. 

  NEVER check for leaks with an open flame 

 

Summary of Contents for S-656/MK 12 series








Reviews: