6
INSTALLATION
Electrical Connection
Access to the mains terminal is gained by releasing the cover of the terminal block.
The appliance must be connected using a double insulated cord, type 227 IEC 53, HO5V
V-F, which is suitable for use up to 25 amps. This should be connected to a double pole
switched mains supply, with 3mm minimum contact separation at all poles. See fig. 2 for
connection terminal details.
The supply cord MUST be retained using the attached cable clamp any excess cord
MUST be routed away from the appliance and not come into contact with the appliance or
hang loose into a lower compartment.
MAINTENANCE & SERVICING
This appliance needs little maintenance other than cleaning. All parts should be cleaned
using warm soapy water. Do not use abrasive cleaners, steel wool or cleansing powders.
THIS APPLIANCE MUST NOT BE MODIFIED OR ADJUSTED UNLESS CARRIED OUT
BY THE MANUFACTURER OR HIS REPRESENTITIVE. NO PARTS OTHER THAN
THOSE SUPPLIED BY THE MANUFACTURER SHOULD BE USED ON THIS
APPLIANCE
IMPORTANT
•
This appliance must be installed in accordance with the
Regulations in force.
•
Read the instructions before installing or using this appliance.
WARNING
•
DO NOT USE APPLIANCE IF GLASS SURFACE IS CRACKED.
•
ENSURE THAT ALL ELEMENTS ARE SWITCHED OFF AND COOL
BEFORE CLEANING.
Summary of Contents for Country Leisure HB9000EL
Page 2: ...2 ...
