Page 17
Manual Revision 4.1.2
Please see the heading “Clearing Ball Jams” for information on how to resolve
this.
Balls inside the machine
If you find balls inside your machine, please do not attempt to retrieve them
while the machine is on. Turn your machine off at the control panel and then
at the master switch under the machine. Manually swivel the internal firing
mechanism to either side to allow access so that you can reach inside and
retrieve the ball(s).
Balls don’t feed fast enough
It is possible to adjust the feed speed of this machine. If you are finding that
interval “20” is not fast enough to suit your practice sessions, please see the
“feeder speed calibration” heading earlier in this manual.
Battery does not last 3 hours
If the battery is fully charged, your machine should last a minimum of 3 hours
(and can last up to 8 hours on basic settings). If you are not achieving 3
hours, it may be time to replace the battery. Please contact your local dealer
for instructions on how to open the machine casing or watch the instructional
video on our website here:
http://www.spinfiresport.com/support/videos/
. Our
batteries come with a 6 month warranty. The battery specifications are 12V,
20AH, 181.5mm (L) x 77mm (W) x 167mm (H). The weight should be
approximately 6 kg (10 lbs) and the terminal type is T3. These are a common
battery and should be available locally.
The feeder keeps pausing during play
By default, your feeder is designed to turn off automatically after 25 seconds
(can be up to 45 seconds) if no balls are fired. This is to prevent balls firing
unexpectedly at the user. However, sometimes this feature can cause the
feeder to stop, even when balls are firing. The solution is to simply disable this
feature, which you can do by:
1. Start with your machine off.
2. Turn it on by pressing “power” and “down” simultaneously.
3. You can now toggle this setting by pressing “up”.
4. Press “menu” to save the new setting.
Your machine will remember this setting for all future uses (until changed
again).
Horizontal oscillation only fires to the sides, or just to one spot
Horizontal oscillation will move from side to side at a set speed. Depending on
the speed/timing of the feeder, it is possible for balls to fire out in patterns (eg,
one to each side, or all balls to one spot). This has been resolved in software
version 4.1.1 by adding a random pause of up to 2 seconds into the cycle.
Contact your local distributor for a software upgrade, or you can try simply
altering the feeder speed (interval) to be faster or slower and you may find
that balls fire out much more randomly.
Summary of Contents for Pro 1
Page 1: ...Pro 1 Manual ...
