Page 10
Manual Revision 4.1.2
machine. It can be adjusted from 0 – 20 with 20
being the fastest (approximately 1 ball every 2-3
seconds). Note that the balls will not start ejecting
from the machine until you press the
feed
(start/stop)
button.
Ball Speed:
This sets the speed at which the balls are
propelled. It can be set from 0 – 20 with 20 being
the fastest speed (approximately 80mph or
130km/h) and 0 being the slowest (approximately
20mph or 32km/h). Note, slower speeds can be
achieved by adding spin.
Spin:
Using this setting, you can add topspin or slice to
each ball. It can be set from -10 to +10. When set
to -10 you will achieve the highest level of slice.
When set to 0 you will have flat balls while +10
represents the highest level of topspin. You can
also set mild levels of spin.
Elevation:
By pressing the
up
and
down
buttons you can
adjust the level of elevation. It can be set from 0 –
200 with the highest elevation being 200 (use this
setting for lobs). Note: you can only adjust the
elevation
when the menu is not flashing.
Horizontal Angle:
You can vary the horizontal angle that balls are
ejected to by pressing the
left
and
right
buttons.
Note: you can only adjust the
horizontal angle
when the menu is not flashing.
Feed start/stop:
This allows you to start and stop the feeding of
balls from the machine.
Single Spot:
If you simply wish to fire balls to a single location
repeatedly, you start by setting your desired
interval, speed & spin, horizontal angle and also
the elevation height. Then you press the
feed
(start/stop)
button to begin. We suggest you fire
one ball to begin with and then press
feed
(start/stop)
again to pause the machine. If you are
happy with the first ball you fired, then you may
begin practice. Otherwise, you may like to refine
your settings and fire another test ball until you are
happy with the result. You can then press
feed
(start/stop)
to start balls firing and begin play.
Horizontal Oscillation:
Once pressed, the machine will internally oscillate
from side to side in its
wide
setting, firing balls to
any horizontal angle on the court randomly (within
the singles lines). Press this button a second time
to enter the
medium
setting which provides the
same random feature with less width (making it
easier). Press this button a 3
rd
time to cancel the
Summary of Contents for Pro 1
Page 1: ...Pro 1 Manual ...
