H MP Co n f igu ra tio n AP I - S p in e tiX Te ch n ica l Do cu me n ta tion v3 .1
© S p in e tiX S A A ll rig h ts re se rve d .
P a g e 3 6 of 5 8
Note that when the first event is received, the device will take approximately 1.5 seconds to respond.
If no events are received for 90 seconds, the device will switch back to the maximum latency.
This setting should not be enabled when the content played by the HMP contains audio.
The possible values are: yes, no.
Note: Device must be rebooted for this parameter to be applied.
For instance, to enable
the “reduce interactive latency” option
, use:
<reduce-interactive-latency>yes</reduce-interactive-latency>
<touchscreen>
HMP300 and HMP350 only
Calibration parameters of the connected touchscreen. Contains 6 parameter:
<xx>, <xy>, <yx>, <yy>, <tx>, <ty>
Parameters of the configuration matrix.
For instance, to set the unit matrix:
<touchscreen>
<xx>1.00</xx>
<xy>0.00</xy>
<tx>0.00</tx>
<yx>0.00</yx>
<yy>1.00</yy>
<ty>0.00</ty>
</touchscreen>
