122PB UNEVEN PRO BARS ll
Assembly Instructions
Page 8 of 11
2. Have two people stand the sides up, one person per side. Make sure the bases are properly
installed on the mount pins as shown on page 3.
3. Attach one rail to the two short uprights. Note that the seam on the rail faces down.
Ensure that the pin in each end of the rail is inserted all the way into the slot of the
swivel head and has passed the Safety Screws.
4. Tighten the low bar swivel head safety screws on both sides.
A properly fitted rail cannot be removed from the swivel head without unscrewing the
Safety Screws.
5. Attach the second rail to the long uprights and repeat step 4.
6. Attach cables to the short uprights.
Remember to close and tighten the quick links. The quick links should be oriented so
they will be tightened by turning the nut down. That will help prevent it from
unthreading during the use of the apparatus.
7. Attach cables to the long uprights.
Again, remember to close and tighten the quick links. The quick links should be
oriented so they will be tightened by turning the nut down . That will help prevent it from
unthreading during the use of the apparatus.
8. Tighten cables until the uneven bars can support themselves.
Make sure uneven bars will stay up on their own before letting go of them.
9. Adjust the tie-down system as explained in your tie-down instructions.
