SPIERINGS SK375-AT3, Manual, Page: 164 / 228

SK375-AT3
Hydraulic system
Truck
8-6 SPIERINGS MOBILE CRANES USER MANUAL V 0.0
Nov
2
0
1
4
C
h
a
n
g
e
s
a
n
d
t
y
p
o
g
ra
p
h
ic
a
l e
rr
o
rs
r
e
s
e
rv
e
d
.
©
2
0
1
4
S
p
ie
ri
n
g
s
M
o
b
ile
Cr
a
n
e
s
–
A
ll r
ig
h
ts
r
e
s
e
rv
e
d
.
8.3.3. Replacing the hydraulic fine filter at rear axle steering
he hydraulic system of the rear axle steering is equipped with a hydraulic fine filter.
The fine filter (blue colour) is located in the left-hand engine cowling, next to the course filter
(see Picture 8-5 ).
For replacing the hydraulic fine filter, the following steps must be carried out:
1. Turn off the diesel engine of the truck;
2. Place an oil tray under the filter;
3. Unscrew the bottom of the filter (wrench width 19);
4. Remove the filter from the holder;
5. Clean the holder, if necessary, with a lint-free dry cloth;
6. Replace the O-ring by a new one, which is lightly greased
(see § 14.5. Specifications hydraulic system truck );
7. Replace the fine filter by a new one (see § 14.5. Specifications hydraulic system truck );
8. Mount the bottom of the fine filter.
For more information, see § 5.3.6. Maintenance schedule hydraulic system truck.
Picture 8-5
INFORMATION!
Replace this fine filter when the course filter is removed with regard to limited
workspace.