Spida Machinery Mini 10, Operation & Service Manual

Page: 62 / 68

Safe Housekeeping Practices Checked
Shown location of mains power switch on machine
Shown location of emergency stop buttons on machine
Mains power to be off before commencing any routine maintenance
Advised to keep work area clean and cleat of trip and slip hazards
Shown where and how to access maintenance points
Check any electrical leads to the machine regul
a
rly for deterioration
Ensure working area has adequate lighting
Has read and understands the Maintenance Schedule
VERIFICATION: Training officer to complete this section
Training Officer
Name :
Signature :
Date :
I, the undersigned, declare that:
I have been shown and instructed in the all of the above listed matters.
All the information in this document was shown and demonstrated to me by the instructor.
I have read and understand the Operation and Users Manual and Safe Operation Guideline
Training Checklist and Maintenance Schedule
Operator
Name :
Signature :
Date :
Witnessed by
Name :
Page 2 of 2
Name :
Signature :
Date :
You must sign this original document and return to
Spida Machinery
.
Please keep a copy of the document on site in each employee file.
Page 2 of 2
Machine Operation Checked
Has read and understands the Operation And Service Manual
Has read and understands the Safe Operation Procedures
Has read and understands the Risk Assessment
Has been shown how to operate the Mini
10
from the control panel
Has been shown correct start up procedure
Has been shown how to equalise the pressing action of head
Has been advised on application of timber for cross table support when pressing
Has been advised on correct use of jigging supplied
Has been advised on correct thread types to attach to jigging
Has been shown how to reset safety scanner device
Has been shown how to clean safety scanner device window
Has been aadvised on safety guard design and application
6 0