Spida Machinery Mini 10, Operation & Service Manual

Page: 15 / 68

M
INIMUM COMPANY STANDARDS
-
GENERAL
The Mini 10 operator will apply methods of safeguarding and safe working practices:
Potential hazard Safe work procedure
Clothing Do not wear loose clothing or work gloves, neckties, rings, bracelets or other jewellery
that can become entangled with moving parts.
Protective equipment Always wear correct Personal Protective Equipment including: hearing protection,
safety glasses, safety footwear.
Slip, trips and falls Avoid awkward operations and hand positions where a sudden slip could cause hand or
part of your body to move into the path of machine.
Electric power cords should be above head level or in the floor in such a way that they
are not tripping hazards.
Floor areas and machine table should be level and non-slip.
Clean up spills immediately.
Workplace
Use good lighting so that work piece, pressing head, and machine controls can be seen
clearly.
Position or shade lighting sources so they do not shine in the operator/s eyes or cause
any glare or reflections.
Ensure that the floor space around equipment is sufficient to enable you to fabricate the
size of work piece being processed safely without bumping into other workers or
equipment.
Keep work area free of clutter, well swept, and well lit.
Ensure precut stock is stacked in appropriate area to avoid accidental contact with
sharp ends.
Machine capacity Do not use the machine for any other purpose than that for which it is designed.
Housekeeping Clean built-up foreign material, unused jigging/ tooling and dirt from around machine,
electrical leads and power points.
Defects Report all defects to the supervisor for appropriate action.
Warning! Do not operate a defective machine.
S
AFETY INFORMATION
13