Spida Machinery Mini 10, Operation & Service Manual

Page: 50 / 68

M
AINTENANCE INFORMATION
A
NNUAL MAINTENANCE SCHEDULE
Service Location Procedure
Hydraulic :
General
Refer daily/ weekly/6 monthly maintenance schedule.
Hydraulic :
Oil Quality
Filter Hydraulic oil filters will be required to be changed yearly.
Oil quality should be checked when replacing the filter.
If oil is found to have excessive contaminates it will be required to be
replaced.
Tank Drain and clean oil tank with a clean cloth.
Fill tank using Shell Tellus 46. Approx. 200 litres will be required.
Hydraulic :
Hoses, Fittings,
Seals
Keep all
connections
tight Check hydraulic motor assembly and fixings.
Check hydraulic system hoses are not frayed or damaged.
Bad leaks caused through hose breaks or component failure should be
reported to Spida Machinery or selected Hydraulic Personnel.
Mechanical :
General
Refer daily/ weekly/ biannual maintenance schedule.
Major
components All components of machine will require a general inspection for signs of
deterioration due to normal wear and tear of machine under operation.
Check, adjust and tighten all major components.
Check structural components for cracks or signs of fatigue.
Table Grease should be applied to the underside of the table.
Electrical :
General
Inspection
Control panel
Test operational controls are functioning.
Check emergency stop
button works.
E lectrical
power supply
All wires are not frayed or damaged.
Trays and supply system support/attachment points for cleanliness and
fixing.
WARNING! Electrical power supply must be isolated from machinery and appropriate danger tagging in places
whenever any maintenance is being performed on machinery. Any defects, which are found on inspection, should be
rectified immediately and reported to the supervisor for appropriate action.
SICK unit
Check SICK unit is funtioning correctly.
48