SPHINX
Myth 7
9
FM reception mono/stereo
The tuner defaults to stereo reception. As soon as a
strong stereo signal is received the display shows
STEREO.
If the stereo reception is disrupted, the indication is
extinguished and MUTING will illuminate: any noise
is thus
suppressed.
I
If noise-free stereo reception is impossible you may
select MONO by pressing the MUTE/MONO button
on the Remote (5), MUTING disappears from the
display and now MONO is indicated.
In MONO mode MUTING is inactive so you are able
to receive the weakest signals.
Stations with a signal strength below the MUTING
threshold might be suppressed after activating the
MUTING function.
J
Station Memory
There are 59 memory locations available for storing
stations plus settings. Select the station you want to
store manually or with the Auto Tuning function.
Press the
m
MEM button (7).
K
If all locations are used the display shows MEM
FULL for approx. 1.5 seconds.
L
If not, the selected station is stored at the first
available lowest numbered memory location,
meaning you do not have to input any location
number.
With each button press you may select a higher
(free) location. The definite memory location is only
selected a few seconds after you have finally
released the MEM button.
Each time the MONO or STEREO setting is changed
this is automatically stored (FM only).
After you have stored the desired stations with
sufficient signal quality you may change the stored
order. So your most favourite station can for
example be located at position ‘1’.
Storing a station in memory
To store a selected station press the
m
MEM (7)
button. The first station to be stored is assigned to
memory 1, the next to memory 2 and so on.
If you want to “move” a stored station to another
memory location: press
m
MEM (7). The station is
always assigned to the first available memory.
It is possible to move a favourite and already
programmed station to another memory location.
Example:
You would like to move a favourite station
from location “6” to location “1”.
Select location 1. If you would like to keep the
station data programmed at this location, please
press the
m
MEM button (7) first. The station from
location 1 is moved to the first available location as
shown in the display and location 1 is cleared.
If you
don't
want to keep the station settings from
location 1, just press the
m
DEL (10) button once to
clear location “1”.
Select location “6” and then press the
m
MEM (7)
button. The station is now assigned to number “1”.
Recalling a station from memory
To recall a stored station press the
m
STAT
Ù
or
Ú
button (3, 4). The stations can also be recalled via
the supplied Remote control: you may find more
information at page 13.
The stations are recalled in ascending (
Ù
) or
descending (
Ú
) order.
If you have selected an ‘empty’ memory location the
display will briefly show
FREE.
M
The Myth 7 then selects the last previous used
location and frequency.
The display shows this selected memory to the left
and the frequency to the right.
N