SPHINX
Myth 7
16
9. CARE AND MAINTENANCE
Clean the exterior with a soft, lint-free, anti-static
cloth. Do not use force while wiping the surface.
To remove difficult stains use a few drops of
detergent on a moist cloth, sweep carefully and
wipe dry afterwards.
If some scratching occurs, please first consult your
Sphinx dealer. He can give you advice about
possible solutions.
Do not use polishing or cleaning agents
: they
may damage the sensitive acrylic finish.
Do not use aerosol cleaning agents
.
Most contain solvents which might actively react
and damage the acrylic finish.
10. TECHNICAL SPECIFICATIONS
FM section
87.5 - 108.0 MHz
Sensitivity, mono at (S+N)/N = 30 dB
11 dBf (1 µV )
mono at (S+N)/N = 50 dB
26 dBf (6 µV)
stereo at (S+N)/N = 50 dB
42 dBf (35 µV)
Dynamic selectivity (mono + stereo) (Wide / Narrow)
60 / 80 dB
Harmonic distortion, (mono/stereo)
<0.11 / 0.12%
(S+N)/N (IHF-A), (mono/stereo)
>58 / 59 dB
Channel separation
>49 dB
Tuning accuracy, automatic / manual
50 kHz / 25 kHz
Special function
RDS ready
Antenna inputs, 75 ohm
Coax: for external antenna
Coax: for cable (with -10 dB pad)
AM section
Automatic tuning
531 - 1602 kHz
Manual tuning
528 - 1605 kHz
Antenna input
2x spring loaded clamp
Preset memories
59 (FM + AM)
Audio section
Outputs
cinch: unbalanced
Level
1.1 V (0.8 dBV)
Impedance
50 ohm
Power consumption
11 W (9 W stand-by)
Dimensions (h x w x d)
75 x 440 x 325 mm
Weight
5 kg
* Measured at 1 kHz and 65 dBf (1 mV) antenna
signal unless otherwise stated.
This unit conforms to the EMC interference regulations from the EU and to the CE standards.
This unit complies with safety regulation VDE 0860 and thus with international safety regulation IEC 65.
Technical specifications can be changed by SPHINX without prior notice if technical developments make this
necessary.
©1999 Audioscript BV
