SPHINX
Myth 7
14
8. SPHINX REMOTE CONTROL
This single Sphinx Remote Control lets you control
all functions: not only of the Myth 7 but of all other
Sphinx equipment.
Only the following buttons and indications of the
Remote apply to the Myth 7 Tuner (the others will
not function):
Toetsen
1.
TUNER:
To select the tuner. All buttons pressed
hereafter will only control the tuner functions.
2.
1 - 0:
With these numbered buttons you may
select each of the 59 memories. To input a two
digit number (e.g. 12): hold the button for the
first digit depressed. After a short while the
display shows
1--
. Now you may select the
second digit (
2)
.
3.
TUNING
Ù
or
Ú
:
These button have the same
function as the TUN
Ù
or
Ú
buttons on the front
panel (1, 2).
4.
BAND:
To select AM or FM frequency band.
5.
MUTE/MONO:
To select MONO reception (for
instance when stereo reception is degraded by
noise); this simultaneously deselects the
MUTING function.
6.
STOP:
This button has the same function as the
N/W button on the front panel (8).
7.
PAUSE:
This button has the same function as
the DISP button on the front panel (11).
8.
PLAY:
After pressing this button the display
shows FM
-- -- --
.
--
. You may input a frequency
in MHz or kHz with the numbered buttons 1 - 0.
Example
: for 107.90 MHz you sequentially
press buttons
1 0 7 9 0
.
The tuner directly tunes to the station. If it
already had been stored in memory the display
shows the memory position with all the
programmed information.
9.
PREV. TRACK:
This button has the same
function as the STAT
Ú
button on the front
panel (4).
10.
WIND:
To select between external antenna
(FM) and cable (CAS) input.
When a station is stored to memory this setting
is also stored.
11.
NEXT TRACK:
This button has the same
function as the STAT
Ù
button on the front
panel (3).
