4. Operational Modes
SPHERE
Portable Traffic Signals
Model:
ST-PS5
/ Technical Specifications, Instruction Manual and Warranty Card
28
4.2.2.2 Setting up the SLAVE Units (Daisy Chain)
To use SLAVE units in a Daisy Chain mode, you must enter unique ID number for each SLAVE unit separately, with ID numbers
ranging from 1 to 6:
1.
Move the MODE knob to the position SLAVE ID
SLAVE
2.
On the amber light, the countdown timer will commence counting from 1 to 6 where each number represents the
unique ID number for SLAVE units
3.
When the desired ID number is displayed on the amber light, move the MODE knob to the position DAISY CHAIN
E.g. if the total number of SLAVES is 2, then each SLAVE unit must have its own unique SLAVE ID number, and they must be programmed in the
correct order. First slave unit must have its SLAVE ID set at 1 and the second slave unit must have its SLAVE ID set at 2.
This procedure permanently stores the unique SLAVE ID number into the memory of the SLAVE unit. Repeat this procedure in
correct order for each SLAVE unit in the DAISY CHAIN mode, from SLAVE ID 1 onwards, to the last SLAVE unit required in
DAISY CHAIN mode.
If you want to program a different SLAVE ID number, repeat the above procedure and choose the desired ID number (from 1
to 6).
