6
3. Turning on the refrigerator
-Once power from MAINS or 12/24VDC is available, the Orange power indicator light will
be illuminated and the appliance is in standby mode, with no Digital display seen.
-Press
button three seconds continually.
Digital display will show the current interior temperature.
Power light will turn to Green and the refrigerator will begin to start normal temperature
controlled operation.
Please place the refrigerator in a well ventilated area, and check that the air
outlet vent is
NOT
blocked or restricted.
4. Setting the temperature
-Press
button once, to adjust the temperature setting.
-Press either
buttons to select the desired temperature (-22°C to 10°C).
-Press
button once again, to adjust the display type from centigrade degree (°C) to
Fahrenheit degree (°F).
-Press either
to swap between (°C) and (°F) display modes.
The cooling temperature appears in the display for a few seconds. The display flashes
several times and then the interior temperature is displayed again.
NOTE
If the ambient temperature is above +32°C (+90 °F), the minimum temperature cannot be
attained.
Should be used after using the
button. Without pressing
button firstly the
are non-operational.
In the event of a power out, when power is restored the original set temperature is
retained.
When the refrigerator’s interior temperature reaches the set temperature, the
compressor will stop in operation. Power indicator light will turn to the orange color. Green
indicates compressor is in operation, Orange indicates Set temperature is reached and
compressor is currently off.
