background image

 

 

During normal operation, emergency mode should NOT be set. Emergency mode 

is only used if the operating panel is malfunctioning. 

  This mode is not suitable for long periods of food storage. If the switch is in the 

“EMERGENCY OVERRIDE” position, the refrigerator is set to full cooling capacity. 
Super-cooled temperatures may be seen and will freeze the items within the unit. 

 

VI. Setting the Low battery cut out (Low voltage protection) 

-When powered from a vehicle 12/24VDC Aux power outlet, if no Aux charging system is 

used to maintain the battery (Solar panels etc.) the AUX battery voltage will decrease with 

use  and  the  compressor  will  stop  working,  so  as  to  protect  the  battery  against  over 

discharge.  Once  the  battery  voltage  reaches  the  restarting  voltage  (after  charging),  the 

compressor will start immediately and resume normal operation.   

-When the battery voltage is too low, the electronic battery protector will take effect. 

The  Red  malfunction  indicator  light  will  blink.  Recharge  the  battery  to  resume  normal 

operation. 

 

Voltage cut out range of electronic battery protector: 

Power Supply   

Status Battery protector   

Low

 Mode 

Medium

 Mode 

High

 Mode 

DC 12V 

Cut out Voltage 

10.1

±

0.3V 

11.4

±

0.3V 

11.8

±

0.3V 

Restarting Voltage 

11.1

±

0.3V 

12.2

±

0.3V 

12.6

±

0.3V 

DC 24V 

Cut out Voltage 

21.5

±

0.3V 

24.1

±

0.3V 

24.6

±

0.3V 

Restarting Voltage 

23.0

±

0.3V 

25.3

±

0.3V 

26.2

±

0.3V 

When  the  refrigerator  power  is  supplied  by  the  Main  Vehicle  starting  battery,  HI 

mode setting is 

recommended

, so as to warrant that vehicle’s battery power is still able to 

start the vehicle when required. Please contact your local Auto electrician as many options 

are available for aux battery fitment.   

If you use additional AUX battery as a power supply, Lo and Med mode setting is available 

for  extended  use  and  operation.  Please  refer  to  the  battery  specifications  for  maximum 

recommend discharge voltages to ensure battery performance.     

Should the power supply be interrupted the Refrigerator is designed to restore the 

previously set temperature settings when power is restored again. 

Summary of Contents for RVX-35













Reviews: