background image

Operating Manual

3

1300-87075-1A

Before You Begin

Read this instruction manual. 

Failure to follow the instructions, in this manual, may result in damage to the unit, 

injury to operating personnel, and poor equipment performance.

Caution: 

All internal adjustments and maintenance must be performed by qualified service personnel.

Material in this manual is for informational purposes only. The contents and the product it describes are subject 

to change without notice. Spex makes no representations or warranties with respect to this manual. In no event 

shall Spex be held liable for any damages, direct or incidental, arising from or related to the use of this manual.

©2022 Spex, an Antylia Scientific company. All rights reserved.

Safety Considerations

It is Important that the Genoseal unit is installed and operated in such a way that all applicable health and safety 

requirements are met. It is the user’s responsibility to ensure that all relevant health and safety regulations are 

identified and complied with. Failure to do so may result in damage to the equipment and may result in personal 

injury. In particular, the user should study the contents of this guide carefully before handling or operating this 

equipment.
Under no circumstances will the supplier of this equipment be liable for any incidental, consequential or any 

special damages of any kind whatsoever, including but not limited to lost profits arising from, or in any way 

connected with the use of this equipment or this instruction manual.

Warning Symbols Used in Accordance With IEC 417

This symbol used alone indicates important operating instructions which reduce the risk of injury or 

poor performance of the unit.

Caution:

 This symbol, in the context of a 

caution

, indicates a potentially hazardous situation which, 

if not avoided, could result in minor to moderate injury or damage to the equipment.

Warning:

 This symbol indicates potentially hazardous situations which, if not avoided, could result 

in serious injury or death.

Warning: 

This symbol indicates situations where dangerous voltages exist and potential for 

electrical shock is present.

Caution: 

Protective Conductor Terminal

Summary of Contents for Genoseal 2060













Reviews: