Operating Manual
22
1300-87075-1A
12.2 Motor Rate Error
If a
Motor Rate Error
message appears on the screen, this indicates the Planetary Mill is not operating within an
acceptable range of the set rate. Press the red
Stop
button to discontinue operation and contact a Spex Service
Technician at +1.855.GET.SPEX or +1.732.623.0465 for assistance.
Figure 22.
Motor Rate Error
12.3 Motor Home Error
If a
Motor Home Error
message appears on the screen, this indicates that the clamp mechanism did not move to
its home position (front center of door opening).
Turn off power to the unit and disconnect the electrical cord. Wait a few minutes, reconnect the electrical cord
and turn on power to the unit. If issue persists, contact Spex.
Figure 23.
Motor Home Error
12.4 Latch Error
If a
Latch Error
message appears on the screen (Figure 24), this indicates that the door interlock cannot engage.
If the door cannot be locked when Start is pressed, the motor will not start and Latch Error will appear on the
display. When this happens, open and close the door, then press Stop to clear Latch Error from the display, and
restore the timer setting. Only when the timer setting is restored can the Planetary Mill be started again.
