Operating Manual
12
1300-87075-1A
5.4.1 Recalling a Protocol
To recall a stored program, touch the
Store/Recall
button on the
Control Panel
screen (Figure 4). In the
Saved
Protocols
screen, select the protocol to highlight the box. Then touch
Select
to send protocol to the
Control
Panel
screen.
5.4.2 Storing a New Protocol
To store a new program, touch the
Store/Recall
button on the
Control Panel
screen (Figure 4). In the
Saved
Protocols
screen, touch the
Add
button as shown in Figure 7. This will bring up the Keyboard screen, a simplified
version of the standard keyboard for a computer.
Figure 8.
Keyboard Screen
The
Clear
key deletes whatever has been entered in the label box. Touching the
Done
key enters the label
shown in the box.
Touch the
Save
button to save the label shown in the box. The label will appear as the name of the program on
the
Saved Protocols
screen (Figure 7).
The
Cancel
key does not change anything on the screen, but returns the display to the
Saved Protocols
screen.
To run the newly saved protocol, touch the protocol to highlight the box. Then touch
Select
to send the protocol
to the
Control Panel
screen. Review the parameters and touch the
Run
button to initiate the protocol.
5.4.3 Edit a Protocol
To edit a saved protocol, touch the protocol name to highlight the box on the
Saved Protocol
screen (Figure 7),
then touch the
Edit
button. From the
Edit Protocol
screen, change the name by touching inside the box. This will
bring up the Keyboard screen, follow the instructions listed in the Storing a Protocol section 5.4.2. The run time,
rate, rest time, and cycles can also be adjusted in the Edit Protocol screen.
