background image

6

Safety in Action

SPERIAN FALL PROTECTION Deutschland GmbH & Co. KG, D-95015 Hof-Bavaria, P. O. B. 16 46,  Phone +49/92 81/83 02-0, Fax +49/92 81/36 26, www.fall-protection.com

Fig. B1

B 2.

Warning!

The cable end attachments must always be fastened to suitably-sized substructures.

B 3. The upper cable anchor point must always be above the user.

B 4.

Warning!

The cable must be sufficiently tensioned. The tension reading on the cable tensioner must
be between the minimum and the maximum marking.

B 5. The maximum distance between two intermediate brackets is 10 meter.

The intermeditate intermediate brackets reduce and limit the deflections of the steel
cable. The deflection of the system depends on the total length and the wind speed. The
intermediates must avoid that the cable is touching the construction and can get
damaged. 

1. 

Guided type fall arrester

     (24836 / 1017271)
2. 

Cable tensioner

     (24798 / 1017380)
     (24799 / 1017381)
3. 

Steel cable

4. 

Universal Beam bracket

     (24815 / 1017382)
     (24814 / 1017383)
5. 

Rung clamp

     (24807 / 1017384)
     (24806 / 1017385)
6. 

Manual intermediate

     (24838 / 1017370)
     (24839 / 1017373)
7. 

Automatic bracket

     (24840 / 1017375)
8. 

End piece of the cable

 

 

Summary of Contents for MILLER Soll Vi-Go



















Reviews: