8
9
Light Meter
1. Press
POWER
to turn the meter on.
2. Plug the probe plug into the probe input socket.
3. Remove the sensor cover from the light sensor.
4. Press and hold
FUNC
to cycle through the options until “LIgHt”
appears on the LCD. Release the
FUNC
button.
5. While holding the sensor handle, point the light sensor directly toward
(facing) the light source. The light measurement will appear on the LCD.
Note…
This meter measures light in Lux or Foot Candles (Ft-cd). To change the
light unit, press and hold
REC ENTER
. Release
REC ENTER
when the
desired unit appears on the LCD.
Zero Adjustment
During light measurement, if the display does not show a value of
0 when the sensor cover is placed on the light sensor, zero adjustment
is needed:
1. With the sensor cover on, press
ZERO
for longer than 3 seconds.
A value of 0 will appear on the LCD.
2. Remove the sensor cover to resume normal measurement.
Type K/J Thermometer
1. Press
POWER
to turn the meter on.
2. Press and hold
FUNC
to cycle through the options until “tP”
appears on the LCD. Release the
FUNC
button.
3. Plug a thermocouple temperature probe (type K or J) into the
thermometer socket. The temperature measurement will appear on
the LCD along with “K” or “J” to indicate the thermocouple type.
Note…
When using the meter for the first time, the meter will default to K
type thermocouple. See page 6 for instructions on changing the
thermocouple type.
Hold Function
1. When measuring any parameter, press
HOLD
to freeze the reading
on the display. “HOLD” will appear on the LCD.
2. Press
HOLD
again to release the hold function. “HOLD” will
disappear from the LCD.
