5
SETUP MODE
The advanced Setup Mode allows you to customize the
following meter preferences and defaults:
• Real Time Clock
• Decimal Type
• Auto Power Off
• Touch-Tone
• Thermometer Type K/J
• Temperature Units
• Sampling Time
• SD Memory Card Format
Note…
The setup functions can be performed under any parameter but not
while utilizing the datalogger function. Once selections are saved, the
meter will default to the selected preferences. Once a selection is saved,
the meter automatically advances to the next setup function (i.e., after
setting the real time clock, the meter will automatically enter the decimal
type setup function).
1. Press
POWER
to turn the meter on.
2. Press
SET
for 2 seconds or longer to enter Setup Mode.
3. Press
NEXT
to cycle through the setup functions.
Note…
Press
ESC
to exit Setup Mode. The meter will return to Normal Mode.
Real Time Clock
1. Enter the clock function from Setup Mode (as described above).
“dAtE” appears on the LCD.
2. Press
ENTER
. The year will appear on the LCD.
3. Press ▲ or ▼ to adjust the value. Press
ENTER
to save the value.
4. Repeat Step 3 to adjust the month, date, hour, minute and second.
Note…
This procedure adjusts the meter’s internal clock. The internal clock will
function when the meter is turned off but only when the batteries have
adequate power (not with low battery power.)
