Sper scientific 850004, Instruction Manual

Page: 7 / 16

6 7
1. Press the MAX/MIN button once to display
“MAX” and the maximum (peak) recorded
light reading. The display will be updated
only when the max (peak) level is exceeded.
2. Press the
MAX/MIN button again to display
“MIN” and the minimum light reading. The
display will be updated only on reaching
lower readings.
3. Press the
MAX/MIN button again to exit
Max/Min mode. The current reading is now
displayed and continually updated.
AUTO POWER OFF
1. If no buttons are pushed for about 10 min-
utes, the meter will automatically turn off.
2. While the meter is on, press the power
button for 2 seconds to override Auto Power
Off: disappears from the display indicat-
ing that Auto Power Off is disabled.
Note… The meter defaults to Auto Power Off
each time it is turned on.