Sper scientific 850004, Instruction Manual

Page: 10 / 16

10 11
Settings
Alarms:
1. Select Instrument Type: Environmental
Meter
.
2. Press
Next
then
Choose Function
and
select your alarm parameter.
3. Insert your
Hi and Low alarm values.
4. Repeat steps 3 & 4 for additional alarm
parameters you wish to set for your meter.
5. Use the
Alarm
switch at the bottom to
enable / disable the alarm for the parameter
shown. Use the
Allow Alarm
switch at the
top to enable / disable alarms on all
parameters.
Recording: Choose your test sample rate
and duration.