6-14. Data storage (SAVE)
1. Press” SAVE” button once, and it will automatically save the
current measuring dose rate value. Record mode is to record a
measuring value every other minute, with max record memory of
4000 group of data (including real-time date, time, measurement
value and measurement unit). When the record memory is full, the
meter will automatically refresh the first recorded groups of data, and
circulating record the data again.
2. Press “SAVE’ button again and will exit data storage mode.
6-15. Bluetooth data transmission (BT)
1. Press “SETUP” button once, select “Bluetooth” (BL) icon by “UP”
or “DOWN” button, and icon will be flashing. Press ENTER button to
confirm your option, and it will shows OFF and ON on the display. By
pressing “UP” or “DOWN” button again to select “on” or “off” of the
Bluetooth. After complete the setting, press “ESC” to exit, and it will
show BL icon on the display.
2. lf not press the “SAVE” button during the transmission, the Blue
-
tooth measuring data is real-time measurement.
3. If press “SAVE” button, it will automatically record the measure
-
ment data during the transmission.
**** For the connection with PC, pis. refer to the software operation
instruction.
7. Battery Voltage Detection function
1. The multi-function digital nuclear radiation scanner uses sup
-
per-powerful Lithium battery.
Press “UP or BATTERY DETECTION” button, it will display the inter
-
nal battery voltage, normal voltage is 2.7V to 3.7V.
2. Press “ESC” button to exit battery voltage detection function.
3. If the power supply is too low (less than 2.7V), the battery icon will
indicate accordingly by flashing and reducing. By then, replacing the
same battery is suggested.
Note: when battery is seriously exhausted, the meter will automati
-
cally power-off and the stored data will be lost.
14
15
8. Connecting Bluetooth
Note:
Use of the included software requires a Windows PC with a
Bluetooth connection.
1. Install the software via the included CD or download the software
from the our website. www.sperdirect.com/software.htm
2. Navigate to your Bluetooth settings and select add a device
3. Select DT-9501 in the list of devices and enter 1234 for the pairing
code.
4. Open the Radiation Meter software and select the com port in the
drop down menu at the top left of the screen then click connect.
