7
SETUP
Note…
Install the Bluetooth adapter as described on page 11.
Meter On and Off
1. Press
POWER
to turn the meter
on
.
2. Press and hold
POWER
for 3 seconds to turn the meter
off
.
Setup Mode
1. Press
POWER
to turn the meter
on
.
2. Press
SET
to enter Setup Mode.
3. Press
MEM
to save each setting choice and continue
cycling through the setup options.
Note…
After each change is made, pressing
SET
will also save
the setting but will exit Setup Mode. The meter will return to
Normal Mode if the
SET
button is pressed..
Bluetooth Selection
1. Press
SET
to enter Setup Mode
.
2. “bluetooth” appears on the display along with the word
“on” or “off”. Press ▲or ▼ to select “on”
3. Press
MEM
to save the selection and toggle to the next
setting. Otherwise, press
SET
to exit setup mode.
Thermocouple Type
1. Press
SET
to enter Setup Mode
.
2. Press
MEM
to toggle through the settings until “Type” appears
on the display along with the thermocouple type.
Press
▲or ▼ to cycle through K, J, E, T, N, R, and S types.
3. Press
MEM
to save the selection and toggle to the next
setting. Otherwise, press
SET
to exit setup mode.
