www.spengler.fr
EN
93
7.2.2 Installing the Alkaline Battery
1. Insert the AA alkaline batteries in the battery compartment, aligning the + on
each battery with the + shown inside the battery compartment.
2. Close the battery door and push it upwards.
3. Tighten the screw that secures the battery door to the pulse monitor.
7.2.3 Installing the Lithium Ion Battery
1. Insert the lithium ion battery in the battery compartment, following shown as
follows:
2. Close the battery door and push it upwards.
3. Tighten the screw that secures the battery door to the pulse monitor.
Press the
battery in
Caution: Check the batteries periodically for corrosion.
Replace batteries if corrosion is present, otherwise damage
to the monitor may occur.
Fig 7-3 Install the battery
Caution: Do not run the pulse monitor using alkaline
batteries of different types or capacities at the same time.
Summary of Contents for MASTER PALM 3 NELLCOR COMPATIBLE
Page 58: ...FR ...
Page 115: ......
Page 116: ...WWW SPENGLER FR Master Palm 3 Manuel utilisateur FR EN 2017 08 A ...
