www.spengler.fr
EN
75
2. Select the year, month and day on the right of
Date
, and set them to the
current date.
3. Select the hour and minute on the right of
Time
and set them to the current
time.
3.6 Selecting the Work Mode
The monitor is designed to operate in the continuous monitoring and spot-
checking mode. Its work mode is shown in the technical alarm area. You can set
the monitor’s work mode as following steps:
1. Select
System
Maintenance
, a password entering window will pop up,
input the password and select
OK
to enter the maintenance window shown
as follows:
2. Select
Work Mode
, you can set the monitor’s wok mode to
Continuous
or
Spot-Check
.
3.6.1 Continuous Monitoring Mode
The continuous monitoring mode is intended for long-term monitoring. This
mode is normally selected when the patient is in hospital or under transport. At
the time, the patient ID defaulted by the system is 0. When the memory reaches
the above limit, the data stored primarily will be cleared.
Fig 3-3 Maintenance window
Summary of Contents for MASTER PALM 3 NELLCOR COMPATIBLE
Page 58: ...FR ...
Page 115: ......
Page 116: ...WWW SPENGLER FR Master Palm 3 Manuel utilisateur FR EN 2017 08 A ...
