EN
4
WARNING:
Do not kink, cut or damage the antenna wire. The
antenna is made of a coaxial wire; if the outer sheath becomes
damaged, the receiver will not work properly. If the antenna is damaged in
any way, replace the antenna before attempting to use the receiver.
Receiver Antenna
The SR215, SR315 and SR515 receivers feature a coaxial antenna design for
easy installation in almost any model. Think of the last 1 inch (32mm) on the tip
of the antenna as the active portion of the antenna, the coaxial portion leading
up to it is just an extension. Install the antenna so the active portion is positioned
as high as possible in the vehicle, and not “in the shadow” of any carbon fi ber
or metal. The case of the receiver can accept an antenna tube directly, making
optimal antenna placement easy (antenna tube not included).
Active portion
of antenna
Antenna Tube Not Included.
Tube size may vary, test for
proper fi t.
Receiver Installation
Installing the Receiver
Install the receiver in the normal position recommended by the vehicle’s
manufacturer. Double-sided tape or foam may be used to secure the receiver
in place.
Summary of Contents for SR215
Page 35: ...IT 35...
