Spektrum NX10 Instruction Manual Download

Page: 23 / 54

SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL

Selecting a Language

In the Systems Settings screen, scroll to highlight language, then

press the scroll wheel to select the language function. Scroll

to select the desired Language. When the desired Language is

selected, press the scroll wheel to accept that Language. Names

you input will not be affected by language change. After changing

the language for the text, you may also want to change the

language for the spoken alerts.

Brightness

The Brightness field adjusts the backlight appearance time and

brightness. The brightness time options are:

On:

The backlight is always on.

Set Time:

The backlight is on for 3, 10, 20, 30, 45 or 60

seconds before automatically dimming. Press the scroll wheel

once to turn the backlight on.

The backlight percentage adjusts the backlight intensity and it

is adjustable in 10% increments from 10% (darker) to 100%

(brighter).

Mode*

To change the gimbal stick mode:

1. Scroll to Mode and press the scroll wheel.

2. Scroll left or right to change the gimbal stick mode. Press the

scroll wheel to save the selection.

3. Select NEXT in the lower left corner until the Calibration

screen appears.

4. Move all transmitter controls to the center position and

complete the calibration process before exiting the System

Settings menu. See “Calibrating Your Transmitter” for more

information.

* For more information, see Physical Transmitter Adjustments in

the back of the manual.

Battery Alarm

The Battery Alarm is set to LiIon battery type for the NX10 and

cannot be changed. The alarm activates when the battery reaches

the low voltage limit.

To change the battery voltage trigger point for the alarm:

1. Scroll to the battery voltage and press the scroll wheel.

2. Turn the scroll wheel left or right to change the voltage level.

3. Press the scroll wheel again to save the selection.

Inactive Alarm

An alarm activates if the transmitter sees a period of inactivity for

a certain amount of time. The alarm is helpful in reminding you

to power off the transmitter and avoiding a situation where the

transmitter battery completely discharges.

The Inactive Alarm options are:

• Inh (No alarm

sounds)

• 5 min

• 10 min (Default)

• 30 min

• 60 min

To change the Inactive alarm time:

1. Scroll to the current alarm time and press the scroll wheel.

2. Scroll left or right to change the alarm time. Press the scroll

wheel to save the selection.

Summary of Contents for NX10























































Search results

Summary of Contents for NX10

Reviews:

Related manuals for NX10

Brands by name

Popular brands

Spektrum NX10, Instruction Manual

Search results

Summary of Contents for NX10

Reviews:

Related manuals for NX10

Brands by name

Popular brands