Spektrum DX8e Instruction Manual Download Page 46

46

SPEKTRUM DX8e • TRANSMITTER INSTRUCTION MANUAL

EN

1-YEAR LIMITED WARRANTY

What this Warranty Covers

Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that 
the product purchased (the “Product”) will be free from defects in 
materials and workmanship for a period of 1 year from the date of 
purchase.

What is Not Covered

This warranty is not transferable and does not cover (i) cosmetic 
damage, (ii) damage due to acts of God, accident, misuse, abuse, 
negligence, commercial use, or due to improper use, installation, 
operation or maintenance, (iii) modifi cation of or to any part of the 
Product, (iv) attempted service by anyone other than a Horizon 
Hobby authorized service center, (v) Product not purchased from an 
authorized Horizon dealer, (vi) Product not compliant with applicable 
technical regulations or (vii) use that violates any applicable laws, 
rules, or regulations. 
OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON 
MAKES NO OTHER WARRANTY OR REPRESENTATION, AND 
HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, 
INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES 
OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR 
A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES 
THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL 
SUITABLY MEET THE REQUIREMENTS OF THE PURCHASER’S 
INTENDED USE. 

Purchaser’s Remedy

Horizon’s sole obligation and purchaser’s sole and exclusive remedy 
shall be that Horizon will, at its option, either (i) service, or (ii) replace, 
any Product determined by Horizon to be defective. Horizon reserves 
the right to inspect any and all Product(s) involved in a warranty 
claim. Service or replacement decisions are at the sole discretion 
of Horizon. Proof of purchase is required for all warranty claims. 
SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY 
IS THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY. 

Limitation of Liability

HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, 
INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR 
PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS 
OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, 
TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY 
OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE 
POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the 
liability of Horizon exceed the individual price of the Product on 
which liability is asserted. As Horizon has no control over use, setup, 
fi nal assembly, modifi cation or misuse, no liability shall be assumed 
nor accepted for any resulting damage or injury. By the act of use, 
setup or assembly, the user accepts all resulting liability. If you as the 
purchaser or user are not prepared to accept the liability associated 
with the use of the Product, purchaser is advised to return the 
Product immediately in new and unused condition to the place of 
purchase.

Law

These terms are governed by Illinois law (without regard to confl ict of 
law principals). This warranty gives you specifi c legal rights, and you 
may also have other rights which vary from state to state. Horizon 
reserves the right to change or modify this warranty at any time 
without notice.

WARRANTY SERVICES
Questions, Assistance, and Services

Your local hobby store and/or place of purchase cannot provide 
warranty support or service. Once assembly, setup or use of the 
Product has been started, you must contact your local distributor 
or Horizon directly. This will enable Horizon to better answer your 

questions and service you in the event that you may need any 
assistance. For questions or assistance, please visit our website 
at www.horizonhobby.com, submit a Product Support Inquiry, or 
call the toll free telephone number referenced in the Warranty and 
Service Contact Information section to speak with a Product Support 
representative. 

Inspection or Services

If this Product needs to be inspected or serviced and is compliant in 
the country you live and use the Product in, please use the Horizon 
Online Service Request submission process found on our website 
or call Horizon to obtain a Return Merchandise Authorization (RMA) 
number. Pack the Product securely using a shipping carton. Please 
note that original boxes may be included, but are not designed 
to withstand the rigors of shipping without additional protection. 
Ship via a carrier that provides tracking and insurance for lost or 
damaged parcels, as Horizon is not responsible for merchandise until 
it arrives and is accepted at our facility. An Online Service Request 
is available at http://www.horizonhobby.com/content/service-
center_render-service-center. If you do not have internet access, 
please contact Horizon Product Support to obtain a RMA number 
along with instructions for submitting your product for service. When 
calling Horizon, you will be asked to provide your complete name, 
street address, email address and phone number where you can be 
reached during business hours. When sending product into Horizon, 
please include your RMA number, a list of the included items, and a 
brief summary of the problem. A copy of your original sales receipt 
must be included for warranty consideration. Be sure your name, 
address, and RMA number are clearly written on the outside of the 
shipping carton. 

NOTICE: Do not ship LiPo batteries to Horizon. If you have 
any issue with a LiPo battery, please contact the appropriate 
Horizon Product Support offi ce.

Warranty Requirements

For Warranty consideration, you must include your original sales 
receipt verifying the proof-of-purchase date. Provided warranty 
conditions have been met, your Product will be serviced or replaced 
free of charge. Service or replacement decisions are at the sole 
discretion of Horizon.

Non-Warranty Service
Should your service not be covered by warranty, service 
will be completed and payment will be required without 
notifi cation or estimate of the expense unless the expense 
exceeds 50% of the retail purchase cost.

 By submitting the 

item for service you are agreeing to payment of the service without 
notifi cation. Service estimates are available upon request. You must 
include this request with your item submitted for service. Non-
warranty service estimates will be billed a minimum of ½ hour of 
labor. In addition you will be billed for return freight. Horizon accepts 
money orders and cashier’s checks, as well as Visa, MasterCard, 
American Express, and Discover cards. By submitting any item 
to Horizon for service, you are agreeing to Horizon’s Terms and 
Conditions found on our website http://www.horizonhobby.com/
content/service-center_render-service-center. 

ATTENTION: Horizon service is limited to Product 
compliant in the country of use and ownership. If 
received, a non-compliant Product will not be serviced. 
Further, the sender will be responsible for arranging 
return shipment of the un-serviced Product, through a 
carrier of the sender’s choice and at the sender’s expense. 
Horizon will hold non-compliant Product for a period of 60 
days from notifi cation, after which it will be discarded.

10-15

Summary of Contents for DX8e


















































Reviews: