background image

EN

3

AR10360T AS3X and SAFE Telemetry Receiver

The Spektrum™ AR10360T 

Receiver is full range with 

telemetry, and is compatible 

with all Spektrum™ DSM2

®

 and 

DSMX

®

 technology transmitters.

Perform the setup for the 

AR10360T receiver through a 

compatible Spektrum Transmitter 

with Forward Programming. The Spektrum PC Programmer can be used for 

firmware updates. 

IMPORTANT: 

The AR10360T receiver only uses forward programming for the 

configuration, do not use the AS3X menu in the main transmitter menu.

Table of Contents

WARNING:

 If equipped, the propeller should not be installed on the 

motor during the setup procedure. Only install the propeller once the 

throttle has been confirmed to operate correctly and the failsafe has been set. 

As an additional safety feature, we recommend the throttle cut is enabled. 

Throttle cut should be engaged any time the aircraft is powered on and not 

in operation. The motor will not rotate when throttle cut is in the ON position.

Specifications ..............................................................................................4

Smart Throttle ..............................................................................................4

Telemetry ................................................................................................. 5

Installing the AR10360T Receiver .................................................................5

Transmitter and Receiver Binding ..................................................................6

Binding........................................................................................................6

Failsafe .......................................................................................................7

Initial Setup .................................................................................................7

AR10360T Receiver — Basic AS3X Setup.....................................................8

AS3X Reaction Test ......................................................................................9

AR10360T Receiver — SAFE Setup ............................................................10

Advanced Tuning ........................................................................................11

Other Settings (Forward Programming) ........................................................15

SAFE (Self Leveling) Flying Tips ...................................................................15

Channel Limitations ....................................................................................16

Flight Log ..................................................................................................17

Range Testing ............................................................................................17

Receiver Power System Requirements .........................................................18

Glossary ....................................................................................................19

Optional Accessories ..................................................................................20

Troubleshooting Guide AS3X .......................................................................21

Troubleshooting Guide ................................................................................22

1-YEAR LIMITED WARRANTY ......................................................................24

Warranty and Service Contact Information ...................................................26

FCC Information .........................................................................................26

IC Information ............................................................................................27

Compliance Information for the European Union ...........................................27

Summary of Contents for AR10360T





























Reviews: