Spektrum AR10360T User Manual Download Page 2

EN

2

The following terms are used throughout the product literature to indicate 

various levels of potential harm when operating this product:

WARNING:

 Procedures, which if not properly followed, create the probability 

of property damage, collateral damage, and serious injury OR create a high 

probability of superficial injury.

CAUTION:

 Procedures, which if not properly followed, create the probability 

of physical property damage AND a possibility of serious injury.

NOTICE:

 Procedures, which if not properly followed, create a possibility of 

physical property damage AND a little or no possibility of injury.

NOTICE

All instructions, warranties and other collateral documents are subject to 

change at the sole discretion of Horizon Hobby, LLC. For up-to-date product 

literature, visit horizonhobby.com or towerhobbies.com and click on the 

support or resources tab for this product.

MEANING OF SPECIAL LANGUAGE

WARNING:

 Read the ENTIRE instruction manual to become familiar 

with the features of the product before operating. Failure to operate 

the product correctly can result in damage to the product, personal property 

and cause serious injury. 
This is a sophisticated hobby product. It must be operated with caution 

and common sense and requires some basic mechanical ability. Failure to 

operate this Product in a safe and responsible manner could result in injury 

or damage to the product or other property. This product is not intended for 

use by children without direct adult supervision. Do not attempt disassembly, 

use with Incompatible components or augment product in any way without 

the approval of Horizon Hobby, LLC. This manual contains instructions for 

safety, operation and maintenance. It is essential to read and follow all the 

instructions and warnings in the manual, prior to assembly, setup or use, in 

order to operate correctly and avoid damage or serious injury.

WARNING AGAINST COUNTERFEIT PRODUCTS.

 

Always 

purchase from a Horizon Hobby, LLC authorized dealer to ensure 

authentic high-quality Spektrum product. Horizon Hobby, LLC disclaims all 

support and warranty with regards, but not limited to, compatibility and 

performance of counterfeit products or products claiming compatibility with 

DSM or Spektrum technology.

NOTICE:

 This product is only intended for use with unmanned, hobby-grade, 

remote-controlled vehicles. Horizon Hobby disclaims all liability outside of the 

intended purpose and will not provide warranty service related thereto.

Age Recommendation: Not for children under 14 years. This is not a toy. 

Summary of Contents for AR10360T





























Reviews: