GETTING ST
ARTED
SAFETY
/
SPECIFICA
TIONS
ASSEMBL
Y
/
INST
ALLA
TION
OPERA
TION
TROUBLESHOOTING
MAINTENANCE /
REP
AIR
5
Loosen and remove the frame head from the frame, then loosen
and remove the front jaw case from the rear jaw case.
Take out the jaw and jaw pusher, and replace with the jaw and
jaw pusher that correspond to the nosepiece installed above.
Assemble the jaw housing and adjust its length using the spanner
gauge as shown.
Re-assemble the frame head and lock it with the corresponding,
previously loosened lock nut.
INSTALLATION INSTRUCTIONS
Figure 3
Figure 4
Figure 5
