Terminal Block Wired For 400 Volt WYE As Viewed
Through Rear Access Panel
FLW1915N_SVG1
L 1 L 2 L 3
N
1
10
10
9
9
9
10
2
3
4
5
6
8
7
11
12
13
14
1.
Black Wire
2.
Black/White Wire
3.
Black/Red Wire
4.
White Wire
5.
White/Red Wire
6.
White/Black Wire
7.
Green/Yellow Wire
8.
Earth/Ground - Power Cord
9.
230 Volt
10.
400 Volt
11.
Blue - Power Cord
12.
Gray - Power Cord
13.
Black - Power Cord
14.
Brown - Power Cord
Figure 9
Non-Gravity Drain Models - Connect
Drain Hose to Drain Receptacle
Remove the drain hose from its shipping position on the rear of
the washer by removing the shipping tape.
IMPORTANT: Drain receptacle must be capable of han-
dling a minimum of 35 mm [1-3/8 inch] outside diame-
ter drain hose.
Drain Flow Rate
Drain Height
Flow Rate
liters per minute [gal-
lons per minute]
0.9 m [3 ft.]
27.7 [7,3]
1.5 m [5 ft.]
17.8 [4.7]
1.8 m [6 ft.]
13.4 [3.5]
2.1 m [7 ft.]
4.8 [1.3]
2.4 m [8 ft.]
0 [0]
FLW2337N_SVG
1
1.
Shipping Tape
Figure 10
Standpipe Installation
1. Place the drain hose into the standpipe.
2. Remove the beaded tie-down strap from accessories bag and
place around standpipe and drain hose and tighten strap to
hold hose to standpipe. Refer to
. This will prevent
Installation
©
Published by permission of the copyright owner -
DO NOT COPY or TRANSMIT
15
Part No. 805197ENR6
Summary of Contents for SF3JM
Page 2: ......
