8. Continue tightening and rechecking until no leaks are found.
FLW2446N_SVG
HOT
COLD
9
8
7
4
3
2
1
5
6
1.
Faucet
2.
Fill Hoses
3.
Install this end of hose to valve connections at rear of
washer
4.
Plain Rubber Washer
5.
Cold Water Connection
6.
Hot Water Connection
7.
Install this end of hose to water supply faucet (Black col-
ored or hex nut shaped coupling for BSPP thread)
NOTE: Both couplings on fill hoses included with
models starting Serial Nos. beginning 1810 are
BSPP thread.
8.
Filter Screens
9.
Double Check Valves
Figure 6
IMPORTANT:
Hoses and other rubber parts deteriorate after exten-
ded use. Hoses may develop cracks, blisters or materi-
al wear from the temperature and constant high pres-
sure they are subjected to.
All hoses should be checked on a monthly basis for
any visible signs of deterioration. Any hose showing
the signs of deterioration listed above should be re-
placed immediately. All hoses should be replaced ev-
ery five years.
IMPORTANT: Turn off water supply faucets after check-
out and demonstration. Owner should turn off water
supply whenever there will be an extended period of
non-use.
All Other Models
Connecting Hoses
1. Insert rubber washers and filter screens (from accessories
bag) in water fill hose couplings (two hoses supplied with
washer). The filter screen must be facing outward.
Models Through Serial Nos. Beginning 1810:
NOTE:
If using black rubber hoses with black and brass cou-
plings: Insert filter screens into the BLACK colored
hose couplings (BSPP thread). Insert rubber washers
into the brass colored hose couplings (Garden Hose
Thread [GHT]).
If using gray braided hoses with silver hose couplings
(one with hex nut): Insert filter screens into the hex nut
shaped hose couplings (BSPP thread). Insert rubber
washers into the knurled, round shaped hose cou-
plings (GHT).
Models Starting Serial Nos. Beginning 1810:
NOTE: Water mixing valve connections at rear of
washer are BSPP thread. Both hose couplings on fill
hoses included with machine are also BSPP thread.
2. Connect fill hose couplings with filter screens to water supply
faucets.
3. Connect the other hose couplings to the hot and cold valve
connections at the rear of the washer.
Models Through Serial Nos. Beginning 1810:
NOTE:
If using black rubber hoses with black and brass cou-
plings: Connect the BLACK colored hose coupling
(BSPP thread) end of the fill hoses (with filter screens)
to the water supply faucets. Then connect end of hoses
with the brass colored hose couplings (GHT) to the hot
and cold water mixing valve connections at rear of
washer.
If using gray braided hoses with silver hose couplings
(one with hex nut): Connect the hex nut shaped hose
couplings (BSPP thread, with filter screens) to the wa-
ter supply faucets. Then connect couplings with
knurled, round shaped couplings (GHT) to the hot and
cold water mixing valve connections at rear of washer.
Models Starting Serial Nos. Beginning 1810:
NOTE: Water mixing valve connections at rear of
washer are BSPP thread. Both hose couplings on fill
hoses included with machine are also BSPP thread.
4. Make sure the hose from the hot water faucet goes to the wa-
ter mixing valve marked “H” and the hose from the cold fau-
cet goes to the valve marked “C”.
5. Thread hose couplings onto valve connections finger tight.
Then turn 1/4 turn with pliers.
IMPORTANT: DO NOT cross thread or overtighten
couplings. This will cause them to leak.
Installation
©
Published by permission of the copyright owner -
DO NOT COPY or TRANSMIT
13
Part No. 805197ENR6
Summary of Contents for SF3JM
Page 2: ......